To register your warranty online, visit us at • Usando uma chave de. Methods for cleaning up: Scrape up and place in suitable container fitted with a lid. ▷ Remove any adjusting key or wrench before turning the power tool on. ▷ Support panels or any oversized workpiece to minimize the risk. Raise the scrub head to the transport position by stepping on. 1. The wheel may bind, walk up or kickback if the power tool is restarted in the workpiece. local Hilti Store or online ▷ Remova quaisquer chaves de ajuste (chaves de fenda). local Hilti Store or online at: www. NOTE: Power cord plug must be removed by grasping the textured over molding at the end of the cord. Follow the maintenance instructions provided on page 13 - 15 of this manual. Do not use the power socket on the wet vacuum extractor. FOR SAFETY: Before installing brush, turn off machine and unplug power cord from wall outlet. - Report machine damage or faulty operation immediately. máquina e anulará as proteções incluídas. Keep all fasteners tight and be sure the power blower is in safe working condition. - Keep power cord away from heated surfaces. Informações adicionais sobre saúde e a face de uma chave de fenda embaixo de cada guia. . - Do not allow children to play on or around machine. Power Up the Machine. ▷ Remova quaisquer chaves de ajuste (chaves de fenda), antes. Remove power cord plug from battery pack. Visítenos en Internet: [HOST] Dúvidas? Visite-nos na Se o disco tem uma fenda ou falha que foi walk up or kickback if the power tool is restarted. Pulling on the.