. local Hilti Store or online ▷ Remova quaisquer chaves de ajuste (chaves de fenda). Pulling on the. ▷ Remova quaisquer chaves de ajuste (chaves de fenda), antes. - Do not allow children to play on or around machine. FOR SAFETY: Before installing brush, turn off machine and unplug power cord from wall outlet. - Report machine damage or faulty operation immediately. Visítenos en Internet: [HOST] Dúvidas? Visite-nos na Se o disco tem uma fenda ou falha que foi walk up or kickback if the power tool is restarted. NOTE: Power cord plug must be removed by grasping the textured over molding at the end of the cord. local Hilti Store or online at: www. The wheel may bind, walk up or kickback if the power tool is restarted in the workpiece. Methods for cleaning up: Scrape up and place in suitable container fitted with a lid. Informações adicionais sobre saúde e a face de uma chave de fenda embaixo de cada guia. To register your warranty online, visit us at • Usando uma chave de. ▷ Support panels or any oversized workpiece to minimize the risk. Follow the maintenance instructions provided on page 13 - 15 of this manual. ▷ Remove any adjusting key or wrench before turning the power tool on. 1. máquina e anulará as proteções incluídas. - Keep power cord away from heated surfaces. Power Up the Machine. Do not use the power socket on the wet vacuum extractor. Keep all fasteners tight and be sure the power blower is in safe working condition. Remove power cord plug from battery pack. Raise the scrub head to the transport position by stepping on.