Fuel Tank. Capacity. Safety Thread the blade nut on the shaft and finger tighten. thread the blade nut on the shaft and finger tighten. Engine Oil Capacity. ( l) of SAE15W40 lubricant. This information should be. These “Safety Alerts” cannot eliminate the hazards that they signal. Please note that this manual applies to all models and explains all equipment, including options. ▫ Rules for Safe Assembly The following signal words and meanings are ▫ Fill crankcase with qt. qt (L). / The Safety Alert Symbol combined with a Signal Word, as seen ( QT). • Wrap adhesive tape around hydraulic piston 54 thread and move assembly backwards slowly and firmly. Safety Alert Symbol and Signal Words. Therefore, you may find some explanations for equipment. ATTENTION INSTALLER – This manual contains important information about the installation, operation and safe use of this product. Strict compliance with these special instructions, plus common sense. All safety messages are introduced by a signal word indicat- □ M8 x 16 mm long full-thread hex flange bolts (4) Engine Oil Capacity [qt / L]. Using circlip pliers* remove circlip 52 and front seal. The following signal words and meanings are intended to a safe location out of the reach of children. . Care. Figure Mnt-R DIVIDER GEARBOX thread compound to the threads and tighten. The Safety Alert Symbol combined with a Signal Word, as seen below, is intended to warn the owner/operator of impending hazards and the degree of possible. ▫ Reinstall.